Clean vs Dirty Scrap: Prepping for Better Prices
Clean means one metal and nothing else: no plastic, rubber, wood or glass attached, and no second metal mixed in. Dirty means attachments or contamination, and yards downgrade dirty material, sometimes a full grade or more. The prep below is the work that moves a load from one grade to the next.
Copper grades
Bare bright. Stripped wire that is bright, shiny and uncoated. The top copper price. See our wire stripping guide for how to produce it.
#1 copper. Clean copper pipe and heavy wire with no solder, paint or heavy corrosion. Bright or lightly tarnished is fine.
#2 copper. Copper with soldered joints, paint, oxidation or fittings attached. Still good money, clearly less than #1. The classic prep: cut the soldered joints and elbows off a run of pipe into the #2 bucket and keep the clean straight runs as #1. A minute with a saw can move most of a plumbing tear-out up a grade.
Insulated wire. Its own category, priced by how much copper is inside relative to insulation. Thick cable grades higher than thin cord.
Aluminum and brass
Aluminum. Clean sheet and extrusion pay best. Cast aluminum (engine blocks, transmission cases, grill parts) is a separate grade. Pull steel bolts, screws and hinges out of aluminum pieces; a few steel screws left in can drop the whole piece to dirty aluminum, which pays notably less.
Brass. Yellow brass (faucets, valves, fittings) is the standard grade. Brass with steel handles, plastic parts or chrome plating attached gets downgraded, so knock the attachments off when they come off easily.
Prep that pays
Drain fluids. Drain oil, fuel and coolant from engines, motors and compressors before you haul them. Yards can refuse leaking loads, and a drained engine is worth the same as a full one without the mess.
Separate the add-ons. Take tires off rims: aluminum rims pay well on their own and a tire on a rim can get the rim graded as dirty. Pull batteries out and sell them as batteries. Set electric motors aside as motors.
Keep grades apart in the truck. Sorted and cleaned metal that gets dumped into one mixed pile at the yard gets graded as a mixed pile. Buckets and bins keep your prep work intact; see the sorting guide.
Prep that does not pay
Know the spread before you start. If the difference between grades is a few cents a pound and you have twenty pounds, an hour of picking screws out is an hour spent earning two dollars. Clean the big, obvious stuff, strip the thick wire, and let the small stuff ride.
More scrapping guides
Manual and motorized wire strippers, which wire is worth stripping, and the grades you get for bare copper.Sorting Scrap Metal: The Magnet Test
Ferrous vs non-ferrous explained, and how to tell copper, brass, aluminum, stainless and steel apart before you load up.Scrap Metal Safety: Gear and Cutting Basics
Gloves, glasses and boots, safe reciprocating saw and angle grinder habits, and the sealed tanks and pressurized items you must never cut.What to Bring to the Scrap Yard
Photo ID, the car title, how yards pay (cash vs check and payment holds), and the first-trip flow from scale to payout window.