Home › Scrapping Tips › How to Strip Copper Wire

How to Strip Copper Wire

Bare copper is the best-paying common metal in most yards, and insulated wire often pays a third as much or less, because the yard has to strip or process it. Stripping the right wire yourself is the single easiest way to raise a payout.

Which wire is worth stripping

Strip the thick stuff. Service entrance cable, feeder wire, Romex house wire and battery cables have a lot of copper under a single jacket, and they strip fast. The thicker the copper core, the more the stripping pays.

Leave the thin stuff insulated. Lamp cords, appliance cords, extension cords and other thin stranded wire take forever to strip for very little copper. Sell them as insulated wire and spend your time on the heavy cable.

Stripping by hand

Score and peel. Lay the wire flat, run a utility knife along the jacket just deep enough to cut the insulation, and peel it back. Nicking the copper cuts and scratches it, and badly cut wire can be downgraded, so let the blade ride on the jacket rather than digging in.

Use a bench stripper for volume. A manual bench-mounted stripper pulls wire past a fixed blade. Set the blade depth for the wire size, feed the wire through, and the jacket splits open so the copper slides out. Much faster than a knife, and the copper comes out clean.

Motorized wire strippers

How they work. An automatic or motorized wire stripper uses an electric motor to feed the wire past a cutting wheel or blade. The cutting edge slices the insulation along its length as the wire passes through, so the jacket splits and peels off in one pass and clean copper comes out the other side. If you have seen scrapping videos of wire going in dirty and coming out as bright copper in seconds, this is the tool doing it.

Set it per wire size. The guide rollers and blade depth adjust to the cable. Set it right and one pass does the job; set it too deep and it shaves copper, too shallow and the jacket stays on. Run a short test piece first whenever you change wire sizes.

When it pays off. A motorized stripper costs real money, so it suits anyone who strips wire regularly or comes into a lot of thick cable: remodel tear-outs, electrician scrap, demolition wire. For a one-time garage cleanout, a knife or a manual stripper is enough.

Run it safely. Feed wire straight, keep fingers, gloves and sleeves clear of the intake, and unplug the machine before clearing a jam or changing the blade. See the safety guide before you start cutting anything.

🎬 Video coming soon
We are choosing a wire stripping video for this spot: hand stripping basics and a motorized stripper in action.

What you get: the grades

Clean stripped wire with bright, shiny, uncoated copper is bare bright, the top copper grade. Duller but still clean copper is usually bought as #1 or #2 copper depending on the yard. Keep your stripped wire in its own bucket, separate from pipe and fittings, so it is graded as wire. The full grade rundown is in our guide to clean vs dirty scrap.

Never burn insulation off. Burning wire is illegal in most places, it is terrible for everyone downwind, and many yards refuse burnt wire outright or pay the lowest grade for it. Strip it or sell it insulated.

More scrapping guides

All scrapping tips →
Find a scrap metal yard near you →