Sorting Scrap Metal: The Magnet Test
Yards pay for metal by the grade, and a mixed load gets priced as its cheapest ingredient. A bucket of copper thrown on a pile of steel gets paid as steel. Ten minutes of sorting is often worth more than the drive to the yard.
The magnet test
Magnet sticks: ferrous. Iron and steel are ferrous metals. They pay the least, usually by the ton or per hundred pounds: car bodies, appliances, beams, cast iron, farm equipment. This is your bulk pile.
Magnet does not stick: non-ferrous. Copper, brass, aluminum, lead and zinc are non-ferrous. They pay by the pound and are worth many times more than steel. Most stainless steel is also non-magnetic or only weakly magnetic, so check heavy silvery pieces that the magnet barely grabs; sinks and some appliance panels are stainless and pay better than regular steel.
Keep a magnet on a string or a handle in your sorting area and test anything you are not sure about. Our tools list has the rest of the basic kit.
Telling the money metals apart
Copper. Reddish brown, heavy. Pipes, fittings, wire, roofing, motors windings. The highest-value common metal; keep it separate and clean.
Brass. Yellow and heavy like copper. Faucets, valves, pipe fittings, keys, door hardware, shell casings. If it is yellow and heavy, it is probably brass.
Aluminum. Silvery and noticeably light. Siding, window frames, gutters, cans, lawn furniture, wheels. Cast aluminum is thicker and duller (engine parts, grills, transmission cases) and is graded separately from clean sheet and extrusion, so keep the two apart.
Lead. Soft, dull gray and very heavy for its size. Wheel weights, old pipes, flashing. Car and truck batteries are bought separately as lead-acid batteries, usually per battery or by the pound; keep them upright and intact.
Electric motors and transformers. Yards buy these as their own category because of the copper windings inside. Do not toss them in with steel; set them aside in their own bin.
Set up sorting bins
Five-gallon buckets work well: one for copper, one for brass, one for aluminum, one for motors, one for insulated wire. Steel goes straight on the truck or trailer. Sort as you tear things down rather than at the end; it is faster, and nothing valuable gets buried under a load of shred steel.
Once a load is sorted, the next step is cleaning it up: what counts as clean vs dirty, and which prep work actually raises the grade, is in our preparing scrap guide.
More scrapping guides
Manual and motorized wire strippers, which wire is worth stripping, and the grades you get for bare copper.Clean vs Dirty Scrap: Prepping for Better Prices
Copper grades (bare bright, #1, #2), clean vs dirty aluminum and brass, and the prep work that pays vs the prep work that does not.Scrap Metal Safety: Gear and Cutting Basics
Gloves, glasses and boots, safe reciprocating saw and angle grinder habits, and the sealed tanks and pressurized items you must never cut.What to Bring to the Scrap Yard
Photo ID, the car title, how yards pay (cash vs check and payment holds), and the first-trip flow from scale to payout window.